News

New products from Kitagawa

As a manufacturer and supplier of EMC products, Kitagawa offers its customers a wide range of solutions in the fields of interference suppression, anti-vibration, shock absorption/impact absorption and thermal management.

For you we have extended our program around the world of ferrites by some series of the German manufacturer.

Learn more in this article about the product variety of the manufacturer Kitagawa and discover more products in our online shop!

Series KRFC

Effective for suppression both of conducted noise up to 30MHz and radiated noise over 30MHz.
Split ferrite clamp with plastic housing enables to attach assembled cable and cables with connecter
Cable tie can assist to hold electric wires and enables the product to be fixed to wire harness. (Excluding KRFC-4)
Wire guiding system prevent wires from being pinched when winding assembly

	A	B	C	D	cable diameter	impedance
KRFC-4	13.7	13.5	27.5	-	Ø 3.5 ~ 4.5	≧ 70
KRFC-6	18.1	18.4	31.5	35.5	Ø 5.5 ~ 6.5	≧ 110
KRFC-8	20.1	20.4	31.5	35.5	Ø 7.5 ~ 8.5	≧ 80
KRFC-9	20.1	20.4	31.5	35.5	Ø 8.5 ~ 9.5	≧ 80
KRFC-10	26.3	26.4	32.4	37.2	Ø 9.5 ~ 10.5	≧ 120
KRFC-13	29.1	29.4	31.5	36.3	Ø 12.5 ~ 13.5	≧ 105

Series MRFC

Effective solutions for suppression of disturbance from switching power supply and motor
Due to conditioning the ferrite material, the product is suitable for suppressing low frequency noise from 150kHz to 30MHz
With optional mounting fixture, the product can be assembled on enclosure by M4 screw.(MRFC-13, MRFC-20)
Fixing by M6 screw is available. (MRFC-H40)

	A	B	C	D	cable diameter	impedance
MRFC-8	20.1	20.4	31.5	35.5	max. Ø 8.5	≧ 20
MRFC-13	29.1	33.05	32.3	37.1	max. Ø 13.5	≧ 20
MRFC-20	40.3	40	47	53.5	max. Ø 20.0	≧ 20
MRFC-H40					max. Ø 40.0	≧ 25

Series TRM

High impedance noise filter in low frequency (KHz to MHz) range
Epoxy coated ferrite has rounded corners to reduce load on cable

	A	B	C	impedance
TRM-16-8-16E-WE	17	7.1	16.9	≧ 70
TRM-20-10-10E-WE	21	9.1	10.9	≧ 35
TRM-25-15-12E-WE	26	14.1	12.9	≧ 35
TRM-31-20-15E-WE	32.1	19	15.9	≧ 30
TRM-38-19-13E-WE	39.2	17.9	14	≧ 35
TRM-47-27-15E-WE	48.5	25.7	16.3	≧ 25

Series TRCB

With plasic housing preventing from cracking and chipping of the ferrite core
Effective noise filter for suppressing low-frequency noise in kHz to MHz range with the higher impedance characteristics

	A	B	C	impedance
TRCB-19-10-10	20	8.1	11.7	≧ 11
TRCB-25-15-12	26.7	13.3	13.5	≧ 8
TRCB-38-19-13	40.5	16.6	15.1	≧ 7

Series TRMH

Due to the higher impedance in the frequency range of 1 MHz or less, the product is effective for suppressing conductive noise around 150 kHz
As the number of turns increases, the impedance improves and a better effectiveness of noise Suppression can be obtained
Resin coated core prevents from cables getting demaged by the edge of the core

	A	B	C	impedance
TRMH-16-8-16E	16.9	7.2	16.8	≧ 18
TRMH-20-10-10E	21	9.2	10.9	≧ 11
TRMH-25-15-12E	25.9	14.1	12.8	≧ 9
TRMH-31-20-15E	32.1	19	15.9	≧ 9
TRMH-38-19-13E	39.1	18	13.9	≧ 11
TRMH-47-27-15E	48.3	26	15.9	≧ 10
TRMH-65-38-30E	67.3	36.6	31.1	≧12

Series KTR

Non-split toroidal core for intermediate frequency range from 3 to 50MHz
Conducted and radiated noise solution for power supply, medical and industrial machines

	A	B	C	impedance
KTR-25-15-18E	26.7	13.4	19.5	≧54
KTR-28-16-20E	29.7	14.4	21.6	≧65
KTR-35-21-18E	35.6	20	18.8	≧80
KTR-40-27-15E	41.4	26.7	15.7	≧50
KTR-47-35-20E	49.1	33.1	21.6	≧54

Our sales team is looking forward to your inquiries!

Friday, May 17, 2019

Back to the news